Is Your Master Boot Record On The Wrong Drive Try This

Whenever you boot your PC, it will usually boot off of whatever drive has the bootloader installed on it.

Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
Click Start Scan to find Windows issues that could be causing PC problems.
Click Repair All to fix issues affecting your computer’s security and performance
Restoro has been downloaded by 0 readers this month.

This is usually an issue those with multiple drives encounter. This generally happens because the computer may not know which drive has the bootloader by default.

One common misconception is that the drive that has the Windows install files is also the drive that has the bootloader, but that couldn’t be more wrong.

Thus, you may need to change the Master Boot Record (MBR) if it is not on the intended drive. Since this process requires several steps, we’ve compiled a step-by-step guide to show you how you can do this.

How do I change the Master Boot Record?

1. Mark System Partition as Active with Windows Installation Media

Enter your PC’s BIOS setup
This procedure varies from PC to PC, so check on your manufacturer’s website for more info
Go to Boot order
Set the CD-ROM (for CDs and DVDs) or Removable Device (for bootable USB drives) as the first boot devices
Save the changes and exit the BIOS setup
The PC will now reboot from the Installation Media
Boot your PC using Installation Media
This could be a CD, DVD or a bootable USB flash drive
Once in the menu, select Repair your computer
Choose Troubleshoot
Select Advanced Options
Enter the Command Prompt
Input these commands, and hit Enter after each of them:
list disk
select disk x (In your case x is the number of the disk you will operate)
list partition
select partition y (In your case y is the number of the correct system partition)
active

Your Windows PC should now booth from the appropriate drive.

This procedure varies from PC to PC, so check on your manufacturer’s website for more info
The PC will now reboot from the Installation Media
This could be a CD, DVD or a bootable USB flash drive
select disk x (In your case x is the number of the disk you will operate)
select partition y (In your case y is the number of the correct system partition)

2. Mark System Partition as Active with MiniTool Partition Wizard

There are plenty of third-party tools out there that can do the same job as the first method, only with fewer steps. One such tool is MiniTool Partition Wizard.

If you want to use it to change the boot drive, then follow the steps below:

Create a bootable USB drive using the MiniTool Partition Wizard’s Bootable Media Builder
Enter your PC’s BIOS setup
Go to Boot order
Set the Removable Device as the first boot devices
Select the partition that you want to make bootable, and mark it as Active via the Set Active feature
Select Apply to save the changes
Restart the PC
Go back to the BIOS
Set the drive as the first Boot order choice
Save your changes and press Exit

Your Windows PC should now boot from the appropriate drive.

By following any of the two steps, you should be able to change the boot drive of your PC without any issues.

Did you find this guide to be useful? Let us know if you know other methods of changing the boot drive in the comment section below.

How do I change the Master Boot Record?#

1. Mark System Partition as Active with Windows Installation Media#

2. Mark System Partition as Active with MiniTool Partition Wizard#

How do I change the Master Boot Record?

1. Mark System Partition as Active with Windows Installation Media

2. Mark System Partition as Active with MiniTool Partition Wizard